DINOL SINT SPECIAL UHPD SAE 10W40 is a high performance engine oil from „low SAPS” group (low sulfate ash, phosphorus and sulfur content) and UHPD (Ultra High Performance Diesel Oil) based on 100% synthetic technology. It is designed for diesel engines of light and heavy commercial vehicles operating under harsh conditions during the whole year and using low sulfur fuel (max. 50 ppm). It is specially formulated for EURO 5 and EURO 6 engines with DPF filter. It can also be used with vehicles equipped with EGR/SCR.
DINOL SINT SPECIAL UHPD SAE 10W40 is used for the lubrication of more modern heavy duty commercial vehicle diesel engines with DPF (particulate filter) system, as well as EGR (exhaust gas recirculation) and SCR (selective catalytic reduction) system, and which meet the requirements of the EURO 6 standard as well as the requirements of the previous EURO 5 and EURO 4 standards, respectively, which prescribe the limits of harmful components in the exhaust emission.
| Characteristics | Units | Typical values | Test methods |
|---|---|---|---|
| Density on 15°C | g/cm3 | 0,862 | SRPS EN ISO 3675 |
| Kinetic viscosity on 100°C | mm2/s | 14,3 | SRPS ISO 3104 |
| Kinetic viscosity on 40°C | mm2/s | 92,6 | SRPS ISO 3104 |
| Viscosity index | - | 160 | ASTM D 2270 |
| Flash point, COC | °C | > 201 | SRPS ISO 2592 |
| Pour point | °C | -36 | SRPS ISO 3016 |
| Total base number (TBN) | mgKOH/g | 12,9 | ASTM D 2896 |
| Dynamic viscosity on -25°C.max | cP | 7000 | ASTM D5293 |
| Sulphated ash | % Wt | 0,98 | ASTM D874 |
DINOL SINT SPECIAL UHPD SAE 10W40 should be stored in their original packaging protected from the direct influence of the atmosphere.
API CJ-4; ACEA E4/E6/ E7/E9; MB- 228.51; MB 228.31; MAN M 3477/3575/3271-1; VOLVO VDS-4, Renault VI RLD-2/3; Mack EO-O premium plus; Cummins CES 20081; Scania Lov-Ash; Cat ECF-3 MTU type 3.1/2.1; Deutz DQC-IV-10-LA; Voith Class B/MB235.28; Detroit 93K218
10L, 20L, 200L
