DINOL SINT SPECIAL UHPD SAE 5W30 is a high performance engine oil from "low SAPS" group (low sulfate ash, phosphorus and sulfur content) and UHPD group (Ultra High Performance Diesel Oil) based on 100% synthetic technology. It is used for diesel engines of light and heavy commercial vehicles which are operating under harsh conditions during the whole year and using low sulfur fuel (max. 50 ppm). It is specially formulated for EURO 5 and EURO 6 engines with DPF filter. It can also be used for vehicles equipped with EGR / SCR.
DINOL SINT SPECIAL UHPD SAE 5W30 is used for the lubrication of more modern heavy duty commercial vehicle diesel engines with particulate DPF filter as well as with EGR (exhaust gas recirculation) and SCR (selective catalytic reduction) system, and which meet the requirements of the EURO 6 standard as well as the requirements of the previous EURO 5 and EURO 4 standards, respectively, which prescribe the limits of harmful components in the exhaust emission.
| Characteristics | Units | Typical values | Test methods |
|---|---|---|---|
| Density on 15°C | g/cm3 | 0,859 | SRPS EN ISO 3675 |
| Kinetic viscosity on 100°C | mm2/s | 12,1 | SRPS ISO 3104 |
| Kinetic viscosity on 40°C | mm2/s | 70,3 | SRPS ISO 3104 |
| Viscosity index | - | 170 | SRPS ISO 2909 |
| Flash point, COC | °C | > 201 | SRPS ISO 2592 |
| Pour point | °C | -42 | SRPS ISO 3016 |
| Total base number (TBN) | mgKOH/g | 13,1 | SRPS ISO 3771 |
| Dynamic viscosity on -30°C.max | cP | 6600 | ASTM D92 |
| Sulphated ash | % Wt | 0,98 | ASTM D874 |
DINOL SINT SPECIAL UHPD SAE 5W30 should be stored in their original packaging protected from the direct influence of the atmosphere.
API CJ-4; ACEA E4/E6/E9/E7; MAN M3677; MAN M3477/M3575/M3271-1; MB-228.31/228.51; Mack EO-O Mack EO-N pr+, VOLVO VDS-4/3; MTU Type 3.1; Renault RLD-2/3; Mack EO-M/EO-N+; CAT ECF-3; Deutz DQC IV-10-LA; DDC 93K218, Cummins CES 20081, Scania LA Scania LDF-4
10L, 20L, 200L
