HIDROLEN OIL HV are a top quality multigrade mineral hydraulic oils with excellent viscosity properties used for modern hydraulic systems exposed to a constant changes of temperature and pressure.
They are produced in viscosity grades: ISO VG 22, VG 32, VG 46, VG 68, VG 100.
HIDROLEN OIL HV oils lubricate modern hydraulic and circulation systems operating under conditions of high pressures, frequent and large temperature changes. They are used for the lubrication of high strength and load capacity hydraulic systems such as hydraulic press, tools, transport, construction, agricultural and mining machines, hydraulic systems on marine equipment, as well as for the lubrication of hydraulic pumps and movable elements of mechanical systems. They can be used in the systems with temperature range between -30˚C and +100˚C outdoors.
| Characteristics | Units | Typical values | Test methods | ||||
|---|---|---|---|---|---|---|---|
| VG 22 | VG 32 | VG 46 | VG 68 | VG 100 | |||
| Kinetic viscosity on 40°C | mm2/s | 22 | 32 | 46 | 68 | 100 | SRPS ISO 3104 |
| Viscosity index | - | 150 | 140 | 140 | 135 | 130 | SRPS EN ISO 2909 |
| Flash point, COC | °C | 190 | 210 | 215 | 220 | 220 | SRPS ISO 2592 |
| Flow point | °C | -30 | -30 | -25 | -25 | -23 | SRPS ISO 3016 |
| Ability to extract water, 43-37-0 mL, max. | minute | 20 (54°C) |
30 (54°C) |
30 (54°C) |
30 (54°C) |
30 (82°C) |
ASTM D 1401 |
| Corrosity (Cu paper, 3h, 100°C) | class | 1 | 1 | 1 | 1 | 1 | SRPS ISO 2160 |
| Foaming, max sequence I, sequence I, sequence III |
mL/mL | 25/0 50/0 25/0 |
25/0 50/0 25/0 |
25/0 50/0 25/0 |
25/0 50/0 25/0 |
25/0 50/0 25/0 |
SRPS ISO 6247 |
HIDROLEN OIL HV should be stored in their original packaging protected from the direct influence of the atmosphere.
SRPS ISO 6743/4 (L-HV), ISO 11158 (HV), DIN 51524/3 (HVLP) AFNOR NF-E 48-603 (HV), DENISON HF-0/HF-2, VICKERS I-286-S, M-2950-S
10L, 20L, 200L, 1000L
