REDUCTOR OILS are a high quality oils for the lubrication of heavy loaded gears, reductors and bearings in heavy industry (cement industry, steel industry, mining, paper industry, rolling mills, rubber industry etc.).
They are produced in viscosity grades: ISO VG 46, VG 68, VG 100, VG 150, VG 220, VG 320, VG 460.
REDUCTOR OILS are used for the lubrication of all types of gear and industrial worm gears that are working in high impact load conditions and very wide range of temperatures. They can also be used freely in circulation systems, for lubrication of gears, sliding and rolling bearings. It is also recommended for the lubrication of cranes, dredges and tool machines.
| Characteristics | Units | Typical values | Test methods | ||||||
|---|---|---|---|---|---|---|---|---|---|
| VG 46 | VG 68 | VG 100 | VG 150 | VG 220 | VG 320 | VG 460 | |||
| Kinetic viscosity on 40°C | mm2/s | 46 | 68 | 100 | 150 | 220 | 320 | 460 | SRPS ISO 3104 |
| Viscosity index | - | 95 | 95 | 95 | 90 | 90 | 90 | 90 | SRPS EN ISO 2909 |
| Flash point, COC | °C | 190 | 220 | 230 | 230 | 240 | 240 | 250 | SRPS ISO 2592 |
| Flow point | °C | -25 | -25 | -20 | -18 | -18 | -15 | -12 | SRPS ISO 3016 |
| Corrosity (Cu paper, 3h, 100°C) | class | 1 | 1 | 1 | 1 | 1 | 1 | 1 | SRPS ISO 2160 |
| Foaming, max sequence I, sequence I, sequence III |
mL/mL | 50/0 50/0 50/0 |
50/0 50/0 50/0 |
50/0 50/0 50/0 |
50/0 50/0 50/0 |
50/0 50/0 50/0 |
50/0 50/0 50/0 |
50/0 50/0 50/0 |
SRPS ISO 6247 |
| Deemulsivity, (max. ml 43-37-0/ 40-37-3) | minute | 15 | 15 | 15 | 15 | 15 | 15 | 15 | ASTM D 1401 |
REDUCTOR OILS should be stored in their original packaging protected from the direct influence of the atmosphere.
SRPS ISO 6743/6 (CKC/CKD), SRPS 12925-1(L-CKC/CKD), DIN 51517/3 AGMA 9005, USS 224, CINCINNATI MACHINE EP gear oil
10L, 200L, 1000L
